28
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
Preparations
¡
Connect a video movie camera or another VCR to this VCR
as shown.
≥
Display the VCR picture on the TV.
¡
Insert the cassette on which the copying is to be performed,
and make sure that its erasure prevention tab is not broken
out.
≥
Make sure that the system is set properly. See page 18.
¡
Select the audio source required by pressing the INPUT
SELECT button
Q
to set A1 or A2.
A1: Through the AV1 (AUDIO IN/VIDEO IN) sockets.
A2: Through the AV2 (AUDIO IN/VIDEO IN) sockets on
front panel.
Operations
1
Press the Play button
I
to start playback.
2
At the point where you want to join a new scene, press
the Pause/Slow button
7
to put it in the still playback
mode.
3
Press the REC button
K
to put it in the recording pause
mode.
4
Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
5
When that point is reached, press the Pause/Slow button
7
again to start recording the new picture and sound
from the playback unit.
6
To record (copy) additional scenes, press the Pause/
Slow button
7
to put this VCR in the recording pause
mode and then perform above steps
4
and
5
again.
7
At the point where you want to stop recording, press the
Stop button
9
to finish recording.
Notes:
≥
If you leave the VCR in the recording pause mode for more
than 5 minutes in step
3
or
6
, the VCR automatically
switches over to the stop mode to protect the video heads.
¡
If “DIRECT REC” is set to “ON”, connect with AV2 sockets
and select A2.
Editing
POWER
Í
/I
2
PULL-OPEN
RF
OUT
IN
VIDEO
IN (AV1) OUT
AUDIO
DIRECT REC
A.DUB
;
PAUSE/STILL
AV1 (VIDEO IN
c
/ AUDIO IN
f
)
Recording VCR
AV2 (VIDEO IN
[
/
AUDIO IN
\
)
Other VCR or
Video movie camera
