6
If the Sliding Cover of the Remote Control
Becomes Detached
If the sliding cover of the remote control becomes detached
accidentally, fit it securely in place by placing it on the top of
the remote control at the position shown in the illustration
below, and pushing it down until it clicks into position.
≥
It is not possible to fit the sliding cover in place by pushing
or sliding it on from the bottom end of the remote control.
Wrong
Correct
1
2
-
-
+
+
3
1 Slide off the battery cover.
2 Insert the batteries with the
polarity (
+
and
-
) correctly
aligned.
3 Replace the battery cover.
Notes for Battery Replacement:
≥
The service life of the batteries is approximately 1 year.
However, it varies considerably depending on the
frequency of use.
≥
When they are exhausted, replace them with two AA, UM3,
or R6 size batteries.
≥
When the batteries are exhausted, remove them
immediately and dispose of them correctly.
≥
Make sure that the batteries are inserted with the polarity
(
+
and
-
) correctly aligned.
≥
Do not mix old battery with new battery.
≥
Do not mix different battery types, i.e. Alkaline and
Manganese.
≥
Do not use rechargeable (Ni-Cd) batteries.
≥
Do not heat or short-circuit the batteries.
≥
When you do not use the remote control for a long time,
take out the batteries and store them in a cool, dry place.
Inserting Remote Control Batteries
Preparing the Remote Control
