http://cxema.ru
PROCEDURES
FIP Display
Press the FF and EJECT keys
simultaneously for 3 seconds.
Press the FF and EJECT keys
simultaneously more twice.
Press the EJECT key for 3
seconds.
Insert the Alignment Tape.
(PAL: VFJ81215H3F)
(NTSC: VFM8080HQFP)
This adjustment is automatically
started. (During the adjustment,
the picture will be appeared on
the monitor.)
When this Adjustment is terminated, the following
operation will be activated.
-
Adjustment completed: The tape will be ejected.
-
Adjustment incompleted: "F2*" is indicated on the FIP.Check the
Servo/System Control circuit and Cylinder Unit.
To release Service Mode, press the FF and EJECT
keys.
simultaneously 6 times until the normal indication on
the FIP.
Fig. E1
3.3.3. RECORDING CURRENT ADJUSTMENT (NV-SJ207AF ONLY)
Содержание NV-SJ200AM
