Panasonic NV-MV20EB/EBL Скачать руководство пользователя страница 44

Страница: 44 / 48

I HAVE AN ON SCREEN MESSAGE.

Play

THE VCR DISPLAY IS NOT ILLUMINATED.

THE DISPLAY IS LIT, BUT THE VCR CANNOT
BE OPERATED.

TIMER REC

VCR PICTURE DOES NOT APPEAR ON THE SCREEN.

AUTO CLOCK SETTING DOES NOT OPERATE.

THE PLAYBACK PICTURE IS DISTORTED,
BLACK AND WHITE OR HAS HORIZONTAL
NOISE BARS.

You have attempted to carry out a function, which is
not possible at this time. It may be that no tape is
inserted and you have pressed

, or that you

tried to change the details of a timer recording whilst
it was being carried out.

The AC mains lead has become disconnected.

Connect mains lead securely.

The VCR is in timer recording mode.

Press

to cancel the mode.

Safety devices are operating.

Disconnect the mains, wait for 1 minute and reconnect.
If problem persists, consult service engineer.

If connected via RF

Check RF output channel and adjust if necessary.
(See page 19 for details.)

If connected via SCART

Check connections and choose appropriate AV channel on TV.

Teletext information is not available or cannot be read.

Set the clock manually. (See page 39 for details.)

The tracking adjustment is not correct.

Adjust the tracking. (See page 23.)

The playback channel on the TV has not been tuned properly.

Re-tune the TV.

The video heads may be worn or clogged.

Consult service engineer.

Please follow the instructions as given on the display.

Before requesting service

Содержание NV-MV20EB/EBL

















































Результаты поиска

Содержание NV-MV20EB/EBL

Отзывы:

Похожие инструкции для NV-MV20EB/EBL

Бренды по названию

Популярные бренды

Panasonic NV-MV20EB/EBL, Руководство по эксплуатации

Результаты поиска

Содержание NV-MV20EB/EBL

Отзывы:

Похожие инструкции для NV-MV20EB/EBL

Бренды по названию

Популярные бренды