8
Manual Tuning Procedure
1 Press [MENU]
(7)
to display the Main menu on the TV
screen.
2 Press [Cursor]
(37)
(
34
) to select [TUNER PRESET]
then press [OK]
(23)
.
3 Press [Cursor]
(37)
(
34
) to select [CH] then select the
channel number you want to tune by pressing [Cursor]
(37)
(
21
).
4 Confirm that [CLEAR] is set to [OFF].
5 Press [Cursor]
(37)
(
34
) to select [SEARCH] then
press [Cursor]
(37)
(
21
) to start the Manual Tuning.
• If the desired TV station has not been tuned, press
[Cursor]
(37)
(
21
) again.
• Press [MENU]
(7)
and repeat steps
3
-
5
for each
programme position you want to tune to a station.
6 Press [MENU]
(7)
three times to exit the On Screen
Display.
Direct Tuning
Follow steps
1
to
3
of
Manual Tuning Procedure
.
4 Confirm that [CLEAR] is set to [OFF].
5 Press [Cursor]
(37)
(
34
) select [SEARCH].
6 Press [Numeric]
(2)
to enter the number of the desired
programme position.
For the 5A and 9A channels, input the following
numbers:
90 for CH-5A, 91 for CH-9A. (Example for NV-HV60GL.)
• For other channels that require tuning, repeat steps
3
-
6
.
7 Press [MENU]
(7)
twice to exit the On Screen Display.
Fine Tuning Procedure
Follow steps
1
to
3
of
Manual Tuning Procedure
.
4 Press [Cursor]
(37)
(
34
) to select [FINE] then press
[Cursor]
(37)
(
21
) to obtain the best tuning condition.
• Press [OK]
(23)
to return the tuning to its former state.
5 Press [MENU]
(7)
to exit the On Screen Display.
Blanking of Unused Programme Positions
Follow steps
1
to
3
of
Manual Tuning Procedure
.
4 Press [Cursor]
(37)
(
34
) to select [CLEAR] then
press [Cursor]
(37)
(
21
) to select [ON].
• Repeat steps
3
-
4
for other unused programme positions
to skip during the selection of programme positions.
• To cancel the blanking of a programme position select
that programme position then set [CLEAR] to [OFF].
5 Press [MENU]
(7)
twice to exit the On Screen Display.
CH 2
END: MENU
CH 2
SEARCH 74
END: MENU
SEARCH
CH 2
AFC: OK
FINE
:
END: MENU
NV-HV60GL_GN.book 8 ページ ２００３年２月３日 月曜日 午後３時３２分
