26
One-Touch Editing
This editing function makes it very easy to perform repeated
assemble editing, insert editing or audio dubbing as the
connected source unit can also be controlled with this VCR’s
[Shuttle Ring]
(55)
and [Jog Dial]
(54)
.
• First confirm that both recording and source units are
connected to a AC mains socket.
• Press the [MENU]
(7)
and then use the [Cursor]
(38)
34
to select [Other settings].
Press the [OK]
(24)
to display Other setting menu.
Press the [Cursor]
(38)
3421
to select [Edit], and then
set it to [ON]. (See page 30.)
If the source unit also has an [Edit] setting (either a switch
or a menu setting), be sure to set it to [OFF] on the source
unit.
• Connect the EDIT socket
(61)
on this VCR to a video
movie camera or a VCR using the Edit cable (not supplied).
• If the source unit has the LANC type socket, connect the
8mm CONTROL socket
(62)
on this VCR to a video movie
camera or a VCR using the LANC type edit cable.
• Press the [INPUT SELECT]
(3)
to select the AV Input
(external input) [A1], [A2] or [A3] according to the socket(s)
on the VCR to which you have connected the source unit.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
• Make sure that [AV2] is set to [EXT]. (See page 29.)
A3: When connected to the Video Input socket/S-Video
Input socket and Audio Input sockets on the front
panel of the this VCR
• Use the L connector for operations in the normal
(monaural) mode.
1)
Press the [Pause/Still]
(53)
on this
VCR and then use the [Shuttle
Ring]
(55)
or [Jog Dial]
(54)
to
search for the tape position from
which you want to start recording.
2)
Press the [REC]
(28)
to put it in the recording pause
mode.
• This automatically puts the source unit in the still
playback mode.
• Instead of the [REC]
(28)
, press the [INSERT]
(48)
to
perform insert editing, or the [A.DUB]
(49)
for audio
dubbing, or the [INSERT]
(48)
and [A.DUB]
(49)
simultaneously for AV insert editing.
3)
Use the [Shuttle Ring]
(55)
or [Jog Dial]
(54)
on this
VCR to search for point in the picture from the source unit
from which you want to start recording.
4)
Press the [Pause/Still]
(53)
on this VCR to start editing.
• Playback on the source unit starts automatically at the
same time.
5)
When you reach the point in the picture from the source
unit where you want to finish recording, press the [Pause/
Still]
(53)
on this VCR again.
• This VCR is now in the recording pause mode and the
source unit in the still playback mode.
6)
Press the [Stop]
(9)
to finish editing.
• After you have finished editing, disconnect the Edit
cable.
Hints:
• If you want to change the audio recording level, adjust it.
(See page 14.)
• If you connect the optional Editing Controller (VW-EC500E/
EC310E/EC300E) to the EDIT socket
(61)
, such editing functions
as assemble editing, insert editing and audio dubbing can be
performed more quickly and efficiently between this VCR and
another VCR or a movie camera.
EJECT
EXT LINK
TBC
3D DNR
A.DUB
INSERT
(61)
(44)
(43)
(57)
(56)
(42)
(62)
Video movie
camera
Other VCR
Edit cable
(not supplied)
LANC type
edit cable
(not supplied)
or
