Panasonic NV-HS860EE-S, Руководство по обслуживанию, Страница: 4 / 143

1. Disconnect the AC plug and replace the IC6701.
STEP2.INPUT THE MODEL& OPTION CODE
1. Set up the model code and option code by ordering the following
table.
PROCEDURE F.I.P. DISPLAY
Turn on the Service Mode
-
"Turn the Shuttle Ring to FF"*1 and press
the EJECT key simultaneously for more than
3 seconds.
Activate the Service Mode 2
-
"Turn the Shuttle Ring to FF"*1 and press
the EJECT key in twice.
Activate the Entering Mode.
-
Press the EJECT key in more than 3
seconds.
Set the Mode 2.
-
Press the CH UP key in twice.
Display the Setting Code.
-
Press the POWER Button. / (POWER ON)
(Colon Starts
Flashing)
Enter the Model and Option Code.
-
Set the Model and Option code by using REW, PLAY, STOP and FF
keys on the Remote Controller. (See Fig.S1Service Screen (Sample) & S2)
Exit from Service Mode.
-
Press the POWER Button. / (POWER OFF)
-
Press FF and EJECT keys simultaneously in
6 times.
(Normal
Indication)
*1: NV-HS960 only. As for NV-HS860, press the FF key instead of "turning the Jog dial."
Fig.S1 Service Screen (Sample)