10
1
2
1
Lens Cap and Grip Belt
ª
Attach the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1
Pass the end of the Lens Cap String through the Lens Cap
String holder.
2
Pass the other end of the String through the loop made by
the String itself and pull it toward the direction indicated by
an arrow.
3
Fit the lens cap onto the lens cap string.
≥
The removed Lens Cap can be hooked onto the Grip Belt
1
. (When you
are not recording, be sure to keep the Lens Cap attached to the Lens for
protection.)
ª
Adjust the Grip Belt
Adjust the length of the Grip Belt to the size of your hand.
1
1
1
1
Detach the tip of the Grip Belt and adjust the length of it.
2
2
2
2
Reattach the Grip Belt.
~~~~~~~~~~~~~~~~~~~~~~~~
Attaching the Shoulder Strap
We recommend that you attach the Shoulder Strap before going out of doors
to record so as to avoid dropping the Movie Camera.
1
Pull the end of the Shoulder Strap through the Shoulder
Strap Holder on the Movie Camera.
2
Fold the tip of the Shoulder Strap, run it through the
Shoulder Strap Length Adjuster, and pull it.
≥
Pull it out more than 2 cm
1
from the Shoulder Strap Length Adjuster
so that it cannot slip off.
~~~~~~~~~~~~~~~~~~~~~~~~
Inserting a Cassette
1
Slide the [OPEN/EJECT] Lever toward the front and pull
down to open the Cassette Compartment.
2
Insert a Cassette.
3
Close the Cassette Compartment by pressing the
[PUSH CLOSE] Button.
4
Close the Cassette Compartment Cover.
ª
Accidental Erasure Prevention
Opening the accidental erasure prevention slider
1
on the cassette (by
sliding it in the [SAVE] arrow direction) prevents recording. To enable
recording, close the accidental erasure prevention slider (by sliding it in the
[REC] arrow direction).
≥
For other notes concerning this item, see page 44.
1
2
3
1
R E C
SAVE
1
4
3
CLOSE
PUSH
OPEN/
EJECT
1
2
1
B.book 10 ページ ２００２年１月２８日 月曜日 午後３時４８分
