background image

Others

58

VQT0N43

ª

About the battery

The battery used in the movie camera is a 
rechargeable lithium ion battery. This battery is 
susceptible to temperature and humidity, and the 
effect of temperature increases with increasing or 
decreasing temperature. In the low temperature 
range, the fully charged indication may not 
appear, or the low battery indication may appear 
about 5 minutes after the start of use. At high 
temperature, moreover, the protection function 
may work, disabling use of the movie camera.

Be sure to detach the battery after use.

If the battery is left attached to the movie 
camera, a minute amount of current is 
consumed even when the movie camera power 
is [OFF]. If the battery is left attached to the 
movie camera for a long time, over-discharge 
takes place. The battery may become unusable 
after it is charged.

Prepare spare batteries when going out for 
recording.

Prepare batteries appropriate to 3 to 4 times the 
period during you want to record pictures in. In 
cold places such as a ski resort, the period 
during which you can record pictures is 
shortened. 

When you travel, do not forget to bring an AC 
adaptor so that you can recharge the batteries 
at your destination.

If you drop the battery accidentally, check to 
see if the terminals are deformed.

Attaching a deformed battery to the movie 
camera or AC adaptor may damage the movie 
camera or AC adaptor.

After use, be sure to take the cassette out and 
detach the battery from the movie camera or 
pull out the AC mains lead from AC mains 
socket.

The battery should be stored in a cool place free 
from humidity, with as constant temperature as 
possible. (Recommended temperature: 15

o

C to 

25

o

C, Recommended humidity: 40% to 60%) 

Extremely high temperatures or low 
temperatures will shorten the life of the battery.

If the battery is kept in a high-temperature, high-
humidity, or oily-smoky places, the terminals 
may rust and cause malfunctions.

To store the battery for a long period of time, we 
recommend you charge it once every year and 
store it again after you have completely used up 
the charged capacity. 

Dust and other matter attached to the battery 
terminals should be removed.

Do not throw old battery into fire.

Heating a battery or throwing it into a fire may 
result in an explosion.

If the operating time is very short even after the 
battery has been recharged, the battery has 
worn out. Please purchase a new battery. 

ª

About the AC

 

adaptor

If the battery is warm, charging requires more 
time than normal.

If the temperature of the battery is extremely 
high or extremely low, the [CHARGE] lamp may 
continue flashing, and the battery may not be 
charged. After the battery temperature has 
decreased or increased sufficiently, recharging 
starts automatically. So, wait for a while. If the 
lamp still continues flashing even after the 
recharging, the battery or AC adaptor may be 
faulty. If so, please contact a dealer.

If you use the AC adaptor near a radio, radio 
reception may be disturbed. Keep the AC 
adaptor 1 metre or more away from radio.

When using the AC adaptor, it may generate 
whirring sounds. However, this is normal.

After use, be sure to pull out the AC mains lead 
from the AC mains socket. (If they are left 
connected, a minute amount of current is 
consumed.) 

Always keep the electrodes of the AC adaptor 
and battery clean.

ª

About the cassette

Never place the cassette in a high temperature 
place.

The tape may be damaged, producing 
mosaic-like noise at the time of playback.

When storing the cassette after use, be sure 
to rewind the tape to the beginning and take it 
out. 

If the cassette is left for more than 6 months 
(depending on the storage condition) in the 
movie camera or stopped midway, the tape may 
sag and be damaged.

Once every 6 months, wind the tape to the end 
and then rewind it to the beginning. If the 
cassette is left for 1 year or longer without 
winding or rewinding, the tape may be deformed 
by expansion or shrinkage attributable to 
temperature and humidity. The wound tape may 
stick to itself.

Dust, direct sunlight (ultraviolet rays), and 
humidity may damage the tape. Such usage 
may cause damage to the movie camera and 
the heads.

After use, be sure to rewind the tape to the 
beginning, put the cassette in the case to 
protect it from dust, and store it upright.

Keep the cassette away from strong 
magnetism.

Apparatuses using magnets such as magnetic 
necklaces and toys have magnetic force that is 

GS150_140EB.book  58 ページ  2004年11月27日 土曜日 午後4時55分

Содержание NV-GS150EB

































































Отзывы: