background image

44

ª

Inserting/Removing the Cassette

In the case of using a previously recorded Cassette, you 
can use the Camera Search Function to find the position 
where you want to continue recording.

If a new Cassette is inserted, rewind to the beginning of the 
tape before starting recording.

When inserting the cassette, make sure it faces in the right 
direction and then push it in until it stops.

ª

Alarm Sounds

When [BEEP SOUND] on the [OTHER FUNCTIONS] 
Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu is set 
to [ON], confirmation/alarm beeps are issued as follows.
1 Beep

When you start recording

When you switch the [OFF/ON/MODE] Switch from [OFF] 
to [ON]

2 Beeps

When you pause recording

10 Beeps

If you perform a wrong operation before or during recording

ª

Recording

Before turning on the power, remove the Lens Cap. If the 
Lens Cap is still attached when the power is turned [ON], 
Automatic White Balance Adjustment

 (

l

22)

 may not 

function correctly.

ª

Recording Check

For Recording Check, the recording speed mode (SP/LP) 
must be the same as the mode used for the recording. If 
different, playback images will be distorted.

ª

Camera Search

In Camera Search Mode, images may contain 
mosaic-pattern noise. This is a phenomenon that is 
characteristic of digital video and not a malfunction.

If the recording speed modes (SP/LP) of previous 
recording and new recording are different, playback 
images may be distorted.

ª

Photoshot

Photoshot Recording results in slightly inferior image 
quality.

ª

Progressive Photoshot Function

The still pictures are recorded at a slightly rewound point 
from where you press the [PHOTO SHOT] Button.

When you change to the Still Picture Mode, you will hear a 
click. This is the sound of the iris closing and not an 
indication of malfunction.

If you record still pictures in Progressive Photoshot Mode 
when your Movie Camera is set to Programme AE

 (

l

21)

the brightness of the images may change.

About [PROGRESSIVE] Setup

When the [

æ

] Indication is displayed, you can use the 

Progressive Photoshot Function.

When [PROGRESSIVE] is [ON]:

You can use the Progressive Photoshot Function at any 
time. In this case, however, the following functions are 
disabled.

Digital Effect Modes in [EFFECT1] 

(

l

 24)

Digital Zoom [D.ZOOM] 

(

l

19)

1/750 s or faster shutter speed 

(

l

23)

When [PROGRESSIVE] is set to [AUTO]

You cannot use the Progressive Photoshot Function in the 
following cases.

When the zoom magnification is approximately 10

k

 or 

higher

When the shutter speed is 1/750 s or faster

When [EFFECT1] is set to [WIPE], [MIX], [STROBE], 
[GAINUP], [TRACER], [MOSAIC], [MIRROR]

When the pictures are displayed on a Multi screen

ª

Zoom In/Out Functions

When you are zooming on a faraway subject, a sharper 
focus is achieved if the recording subject is 1.2 metres or 
more away from the Movie Camera.

ª

Image Stabilizer Function

The Image Stabilizer Function does not operate in a dimly 
lit place. In this case, the [

[

] Indication flashes.

Under fluorescent lighting, image brightness may change 
or colours may not look natural.

After-images may appear.

When a tripod is used, it is recommended that you turn the 
Image Stabilizer off.

The Image Stabilizer Function does not operate when 
using the Colour Night View. In this case, the [

[

Indication flashes.

ª

Cinema Function

Using the Cinema Mode does not widen the recording 
angle.

If you play back tape recorded in Cinema Mode on a 
wide-screen (16:9) format TV, playback size is 
automatically adjusted to fit the TV screen format. Please 
refer to the TV’s operating instructions for details.

When images are displayed on a TV screen, the Date/Time 
Indication may be erased in some cases.

Depending on the TV, the picture quality may be 
deteriorated.

The Cinema Mode is cancelled when a Title is displayed. 
(NV-GS4/GS5 only)

ª

Backlight Compensation Function

When setting the Iris manually, the Backlight 
Compensation Function does not work.

ª

Wind Noise Reduction Function

It does not work with an external microphone.

When it is set to [ON], directivity of microphone is regulated 
depending on the strength of wind to reduce wind noise.

ª

Programme AE

If any of the Programme AE Modes is selected, you cannot 
adjust the shutter speed 

(

l

23)

 or iris 

(

l

23)

.

You cannot use Sports Mode, Portrait Mode or Low-Light 
Mode with Gain-up Mode [GAINUP].

Sports Mode

During normal playback, the image movement may not 

look smooth.

Because the colour and brightness of the playback 

image may change, avoid recording under fluorescent 
light, mercury light or sodium light.

If you record a subject illuminated with strong light or a 

highly reflective subject, vertical lines of light may 
appear.

If the light is insufficient, the [

5

] Indication flashes.

If this mode is used for indoor recording, playback 

images may flicker.

Sports Mode/Portrait Mode

If you record a still picture in Progressive Photoshot 

Mode, the brightness and hue of the recorded still 
picture may become unstable.

Portrait Mode

If this mode is used for indoor recording, playback 

images may flicker.

Low Light Mode

Extremely dark scenes may not be able to be made 

brighter to a satisfactory degree.

B.book  44 ページ  2002年1月28日 月曜日 午後3時48分

Содержание NV-GS1





















Отзывы: