8
Setting the Remote Control to Operate Your TV
The 3 Methods for Switching
to the AV Input on Your Panasonic TV
Your Panasonic TV uses one of three different methods for
switching between TV reception and the AV input(s). Perform
the operations steps listed for the switching methods A, B and
C below to determine which one your Panasonic TV uses.
A
1
Set the VCR/TV switch
P
to “TV”.
2
Press the AV button
3
to switch to the AV Input.
Each press of the AV button
3
switches between
“TV reception” and “AV Input(s)”.
B
1
Set the VCR/TV switch
P
to “TV”.
2
Press the AV button
3
.
Colour bars for selecting the AV Input appear on
the TV screen.
3
Follow the instructions displayed on the TV screen
to select the desired AV Input from the displayed
colour bars for the AV Input by pressing the
corresponding colour button
J
(red)
:
, DATE
i
(green)
;
, ON
i
(yellow)
G
or OFF
i
(blue)
F
on
the remote control.
C
1
Set the VCR/TV switch
P
to “TV”.
2
Press the AV button
3
.
The last previously selected AV Input indication
appears on the TV screen. The indications for
selecting another AV Input also appear,
but they disappear a few seconds later.
3
Before the indications for selecting another AV
Input disappear, press the
I
button
:
, DATE
j
button
;
, ON
j
button
G
or OFF
j
button
F
to
select the desired AV input.
With the following four buttons, you can move and
select as follows:
I
:
:
Move left
DATE
j
;
: Move down
ON
j
G
:
Move up
OFF
j
F
:
Move right
This setting procedure allows you to operate the TVs of most
brands using the remote control supplied with this VCR.
≥
Some TV models cannot be operated with this remote
control.
1
Set the VCR/TV switch
P
to “TV”.
2
Look up your TV’s manufacturer in the list of TVs
compatible with the VCR’s remote control on the next
page.
3
While keeping the TV-ON/OFF button
1
pressed, use
the Numeric buttons
2
to enter the manufacturer’s code.
If there is more than one code listed for that
manufacturer, try the first code.
Be sure to enter the code in two digits.
Example: 01
4
Check whether you can operate the TV correctly with the
VCR’s remote control.
If the TV cannot be operated properly:
In step
3
, enter the other code listed for that manufacturer
and repeat step
4
.
TV Operation
The explanations below show you what functions individual
buttons have when the VCR/TV switch
P
is set to “TV”.
°°
1
TV-ON/OFF button
To switch the TV on from standby mode (OFF) or vice
versa.
On some TVs it is only possible to switch the TV to
standby mode (OFF) with this button, but not on. In this
case, try to turn the TV on with one of the following
buttons:
Numeric buttons
2
AV button
3
Channel button
N
°°
2
Numeric buttons
To select the programme positions (1–99) on the TV.
°°
3
AV button
To select the desired AV input on the TV.
°°
N
Channel button
To select the desired programme position (TV station) on
the TV.
°°
O
TV/TEXT button
To switch between normal TV mode and teletext mode.
°°
W
Teletext buttons
If your TV is equipped for Teletext reception, you can use
these buttons to change the teletext information
displayed on the screen and select desired information.
For details, refer to your TV’s operating instructions.
°°
X
TV ASPECT button
To switch the screen format between the wide-screen
and other formats.
°°
Y
VOLUME button
To adjust the volume of the TV.
