Panasonic NV-FJ603EL-K, Руководство по обслуживанию

Страница: 22 / 191

PROCEDURES FIP Display
Set the Video Sweep signal
(See Fig.E1)
Make the self-recording tape.
Press the FF and EJECT
Buttons simultaneously for 3
seconds.
Press the FF and EJECT
Buttons simultaneously twice.
Press the EJECT key for 3
seconds.
Press the CH UP and/or CH
DOWN key until "11" is
displayed on the FIP.
Insert the Self-recorded tape
and playback it.
Connect the Oscilloscope to: / *CH1... Video
Out.(TW3002). *CH2... V.FREQ. (TW6002).
Press the "4" key on the Remote Controller. /
(Confirm that TW6002 becomes high (5V).)
Adjust the Frequency response by pressing the
"2" (increase) and/or "8"(decrease) key on the
Remote Controller.
Store the Adjusted value by pressing "5" key on
the Remote Controller.
Release the Service mode by pressing the EJECT
and FF keys simultaneously 6 times until the FIP
becomes normal indication.
Fig. E5
3.3.7. LOCATION OF TEST POINTS & CONTROLS
22