Panasonic NV-DS65, Руководство по эксплуатации

Страница: 13 / 60

13
Using the Viewfinder/LCD Monitor
ª
Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the
displays inside the Viewfinder become clear and easy to read.
1
Pull out the Viewfinder and tilt it up.
2
Adjust by sliding the Eyepiece Corrector Knob
1
.
≥
Do not pull hard on the Eyecup.
ª
Using the LCD Monitor
With the LCD Monitor open, you can also record the picture
while watching it.
1
Put the finger on the [OPEN 4 ] Knob and pull the
LCD Monitor out about 90
o
in the direction of the
arrow.
≥
The Viewfinder goes off.
2
Adjust the LCD Monitor angle according to the
desired recording angle.
≥
The LCD Monitor can rotate a maximum of 180
o
2
from
the vertical position to the upward direction and a
maximum of 90
o
3
to the downward direction. Forcefully
rotating the LCD Monitor beyond these ranges will damage
the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
ª
Adjusting Brightness and Colour Level
When [LCD/EVF SETUP] on the [CAMERA FUNCTIONS] or
[VCR FUNCTIONS] Main-Menu is selected, the following items
are displayed.
(
l
14)
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD screen.
LCD Colour Level [LCD COLOUR]
It adjusts the colour saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
It adjusts the brightness of the image in the Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be adjusted, and
then turn the [PUSH] Dial to raise or lower the number of vertical
bars in the Bar Indication.
≥
A larger number of vertical bars indicates stronger brightness
or colour saturation.
≥
For other notes concerning this item, see page 53.
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
12:30:45
15.10.2003
2 3
2
180
x
90
x
PRESS MENU TO RETURN
LCD/EVF SETUP
LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
1
1
2
1
OPEN
1
EG-ENG.book 13 ページ ２００３年１月６日 月曜日 午後３時４３分