Panasonic NR-C290GH-W3, Руководство по эксплуатации

Страница: 5 / 32

5
English
Installation
Installation
Choosing the right location
1.Place the refrigerator in the following locations.
●
Locations free from heat and direct sunlight
Minimize reduction of cooling power, and
prevent electricity waste.
●
Well-ventilated locations with low humidity
Minimize rust and generation of condensation.
●
Stout and flat floor
With carpet, tatami mats or vinyl floors,
deformation or discoloration may occur, so
place a board underneath the refrigerator.
●
Place the refrigerator away from other devices
Prevent noise and jammed image display on
TVs and other devices.
●
Locations where allow the power plug to be
cleaned easily
Clean dust regularly.
(To prevent fire caused by dust.)
●
Locations where allow a heat to dissipate.
100 mm
75 mm
50 mm
50 mm
■
Before using the refrigerator for the first time. (P. 12)
• Wipe the inside of the refrigerator with a wet, soft cloth.
2. Fix the refrigerator.
●
If the refrigerator has not been stabilized completely, you may hear rapping noises when the door is
opened/closed. (This will not affect the performance.) Install the refrigerator on a stout and flat floor.
●
Turn the adjustable legs (right and left) until they reach the floor to stabilize the refrigerator.
Adjustable leg
■
If the door is slanted downwards.
Turn the adjustable leg, as shown in the illustration on the right, in
order to adjust the level.
• The freezer/refrigerator doors may be slanted within 4 to 5 days
after installation due to the load of the food or adaptation to the floor
surface. In this case turn the adjustable legs again to restore.
• If it cannot be fixed by this method, use an adjustment plates.
Lower the right
adjustable leg.
3. Plug into a wall outlet.
Plug into a wall outlet of the rated voltage on its own with the rated current and insert plug fully.
●
The power plug can be plugged into an outlet immediately after installation.
●
The surroundings and surfaces (side surfaces) of the refrigerator may become hot
(approximately 50 °C to 60 °C when the ambient temperature is 30 °C) when the power is turned on, but this
is not abnormal. (P. 13)
●
If the power plug is removed, wait at least 7 minutes before plugging it back in. (P. 14)
4. Cool the refrigerator interior.
●
It may take approximately 4 hours to cool the interior.
●
It may take 24 hours or more to cool the interior and achieve equilibrium in the summer, etc.
●
Do not open/close the doors until the interior has been cooled sufficiently.
(Warm air flowing into the interior will block the cooling function.)