NR-BY558/NR-BY55B/NR-BY608
13.6 Plate PF As (X Model)
13.7 Fan Motor
Fig. 1
Fig. 3
Fig. 5
Fig. 6
Fig. 7
Fig. 2
Fig. 4
13.6.1 Remove Chilled case and then check the Rib lock (2 position) at bottom of
Plate PF as Fig.1
13.6.2 Pull out Plate PF As slowly as Fig.2
13.6.3 Open at botton plate control , take off screw on cover duct PC by screwdriver
3 position and take off cover duct control as Fig.3
13.6.4 Take off screw at cover damper PC As 3 position and pull out Plate Duct PC
slowly as Fig.4
13.7.1 Take off connector of Fan motor as Fig.5
13.7.2 Remove Lead wire at bootm of Fan motor. Fig.6
13.7.3 Take off fan motor by use hand pull at rib lock 2 position and push out fan
motor as Fig.7
Rib lock
- 25 -
