Installation
The distance requested for installation
● The top of the refrigerator and the ceiling at least 30 cm.
● The wall and the back of the refrigerator at least 10 cm.
● The side of the refrigerator and the wall at least 5 cm.
Area around the installed unit
●
Do not
locate the refrigerator in a humid place as rust may form and
may cause electric leakage.
●
Do not
locate the refrigerator exposing to direct sunlight.
●
Do not
locate the refrigerator near heat source such as cooking stove
or oven.
●
Do not
block the openings on the circumstances of the refrigerator.
● The refrigerator must be located in the place with good air circulation.
● In case of placing the refrigerator on an uneven surface, adjust the
adjustable bolt to make the refrigerator stands stably.
Moving or shifting
● When moving or shifting the refrigerator, remove ice twister, pan water
evap (refer to page 11 for detail) etc, and check to be sure that there
is no water in both the refrigerator and installed in the location, adjust
the adjustable bolt for locking.
Power cord setting
● To bring power cord for use, pan water evap from left should be lifted
up. Then bring the power cord out and then insert pan water evap into
the block by pressing at both the sides.
LED lamp and Grounding
● The refrigerator LED lamp is specially designed for this refrigerator, it does not function on individual replacing. If
you need replacement, please contact Panasonic Service Center.
● If there is no grounding wiring plug in refrigerator, it should be connected with grounding connection to prevent
electrical hazard from electric leakage.
5
30 cm
10 cm
5 cm
