- 11 -
6. SELF DIAGNOSING FUNCTION
6.1 Inverter : X Series
ECONAVI
LED
QUICK
LED
FCC
DFC
ATC
FC FAN MOTOR
DEFROST HEATER
INV COMP
PCB
HC LEAK (HIGH PRESSURE)
HC LEAK (LOW PRESSURE)
ILLUMINANCE SENSOR
MAX
MED
FC CONTROL LED
MIN
Off
Blinking
Lighting
1. Plug in.
2. Open PC Door.
3. Push button QUICK (1) FREEZER (2) QUICK (1) / process no. 1 ~ 3 must complete
within 30 sec.
4. At Freezer level “MIN” and “MED” blinking (No. 1) and “ECONAVI” light on (No. 2).
5. After 1 minute ECONAVI lamp will be blinking and Freezer level off.
6. Check sensor by use finger close at sensor (No. 3).
7. Freezer level and ECONAVI be recovery (Process No. 4).
8. Self diagnosis from items table as below when have some abnormal.
Start mode
1. Open PC Door.
2. Push button FREEZER (2) QUICK (1) FREEZER (2) FREEZER (2) [Hold 1 sec. over].
3. Check Comp. will not operate.
4. Or push QUICK button / QUICK FREEZING LED will blinking.
Before check have to clear mode as normal.
Manual defrost mode
Self diagnosis / new BW series
NO. 1
NO. 2
NO. 3
NR-BW415 / NR-BW465
ECONAVI
FREEZER
CONTROL LED
QUICK
FREEZING LED
SENSOR
FREEZER CONTROL
BUTTON (2)
QUICK FREEZING
BUTTON (1)