Quick Freezing
Temperature control (Fine adjustment mode)
The refrigerator is specially designed for approriate use, which can adjust the temperature
level to detailed 9 levels with the following details.
How to operate the fine adjustment mode
For the Freezer room
1.
Press the button “Select” until LED “Freezer” turns on
.
2. Set LED display to “Min” with the “Temp. Control” button.
3. Press and hold the “Temp. Control” button (for a few seconds) until the LED display
return to show at “Med” position.
4.
Set “9 levels” mode following below table mentioned by pressing the “Temp. Control” button.
LED Display table
For the Fridge room
Operate above 1 ~ 4 steps with selecting “Fridge” area instead of “Freezer” area.
To reset the setting fine adjustment mode
Repeat step 1 ~ 3, then the refrigerator return to normal operation mode.
Remark:
●-3
o
C cold storage room does not have fine adjustment mode.
●Temperature control varies depend on the changing of environment and food storage quantity.
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Cooling level
Minimum
Maximum
Lighting
Blinking
Not lighting
LED Display
Levels
9
How to operate the “Quick Freezing” mode
●Press the button “Select” until the LED “Freezer” turns on, then press “
Temp Control
” until the
LED “Quick Freezing” turns on. “Quick Freezing” mode starts after 10 seconds.
Remark:
●If you want to stop the operation immediately, repeat the procedure until the LED “Quick
Freezing”
turns off.
●The system will stop the operation automatically when it runs for 60 mins (as ambient
temperature is below 18
o
C) or 150 mins (as ambient temperature is above 18
o
C) and return
to normal mode (the LED “Quick Freezing” turns off.)
●The LED “Quick Freezing” flashing means that the defrosting system is now working. “Quick
Freezing” mode will start right after the defrosting operation is finished.
