Panasonic NR-BR34A, Руководство по эксплуатации

Страница: 9 / 12

Troubleshooting
Vapor generated
inside and outside
the cabinet / surface
of door.
●
Condensation may appear on the surface of cabinet when humidity is high,
e.g. during rainy season or the air circulation is not good.
●
If there is condensation inside, check if the door is completely closed.
Is the refrigerator frequently opened or left open for a long periods of time?
Is there any hot foodstuff refrigerated inside?
The refrigerator
does not operate.
●
Check that the plug and its socket are in good condition.
●
Check if there are any problems with the main fuse or circuit breaker on the
household distribution panel.
●
Check by unplug and wait for 10 minutes before plugging it back in.
The refrigerator
does not cool
enough.
●
Check to be sure that the temperature control button is in the proper position.
●
Check to see if the refrigerator is overloaded or if there are any hot foodstuffs
inside.
●
Is the refrigerator exposed directly to sunlight or a heat source?
●
Is the refrigerator door completely closed?
●
Is the refrigerator door opened frequently?
The refrigerator
generates noise.
●
Check if the refrigerator is located on a stable floor or is installed properly.
●
Check if there is any object in contact with the refrigerator.
Lamp does not turn on.
●
Please contact Panasonic service center.
●
Do you put the food near cold air duct?
●
Do you adjust the temperature control at “Max”? Should adjust to “Med” or “Min”.
Food becomes frozen
●
Are the temperature setting of refrigerator compartment set to
something other than “Med” ?
●
Did you open the doors frequently, or store very hot food?
●
The learning function may automatically disable ECONAVI operation
during times of frequent use.
ECONAVI does not
operate.
(the ECONAVI lamp
does not light)
●
Is there a power failure?
If a power failure occurs, the leaning function data collected will be
lost. ECONAVI operation will rarely be performed until the learning
function has collected the data again.
ECONAVI operation is
rarely performed.
ECONAVI operation
is stopped part way
though.
●
If the auto defrost function is turned on during ECONAVI operation,
normal cooling function will be performed after auto defrost. ECONAVI
operation may be stopped during the defrost and cooling process.
●
The learning function may sometimes restart the
normal cooling operation.
●
Is the light intensity sensor hidden?
●
Is there dirt or scratches on the control panel (light
intensity section)?
●
ECONAVI operation may be performed while
the refrigerator is being used depending on the
conditions of use, but the cooling performance is
maintained.
ECONAVI operation is
performed too often
(the ECONAVI lamp
rarely turns off).
The ECONA
VI lamp does not light properly
.
9
NR-BR34A-EN.indd 9 1/30/14 10:03 AM