Panasonic NR-B53V1, Руководство по обслуживанию

Страница: 63 / 83

63
11.8.2. Door PC A’ssy, PCB (Door PC)
1. Open the Top Hinge Cover (R) by removing 2 screws
and pulling it upwards.
2. Remove the PCB (Door PC).
a. Slide the PCB (Door PC) Holder out of the Top
Hinge Cover (R).
b. Slide out the PCB (Door PC) from its holder and
disconnect its connector to remove.
3. Remove Door PC A’ssy.
a. Disconnect the wire connector.
b. Remove 3 Hex Screws.
c. Lift the Top Hinge (R) to remove.
d. Lift the Door PC A’ssy off the Bottom Hinge (R) to
remove.
NOTE
When removing the Top Hinge, be careful that the door
does not fall forward.
11.8.3. Bottom Hinge, Adjuster Bolt
1. Remove the right Bottom Hinge and Adjuster Bolt.
a. Remove 1 screw on the Bottom Hinge (R).
b. Remove 3 Hex Screws to remove the Bottom
Hinge (R).
c. Unscrew the Adjuster Bolt to remove.
2. Remove the left Bottom Hinge and Adjuster Bolt the
same way as for right side.