I. SAFETY CAUTIONS FOR REPAIRING
When you repair refrigerator, please kindly take care of following cautions.
a) Warning
Before repairing unit, unplug power supply cord
●
Before you repair refrigerator, unplug the power supply cord.
Use authentic parts when repairing
●
When you replace the parts, please use authentic parts to replace defective parts.
Caution during brazing
●
When you use touch for brazing, please ensure ventilation. Otherwise, you will be poisoned by
carbon monoxide.
Pay attention to using refrigerant
●
If refrigerant touches fire, the gas becomes poisonous gas.
Pay attention to getting electricity shock
●
When you check the voltage of terminal, please do not touch the electricity parts terminal.
●
When you replace the parts, please wait three minutes at least for discharging capacitor.
Check safety after repairing
●
Check the screws, parts, lead wires to take in place.
●
And check the repairing portion whether circumferential parts are damaged or not.
●
Check insulation resistance between power supply cord and earth.
●
When install refrigerator, check condition of power supply cord and plug.
●
Wipe off the dust on plug.
●
Cutting and seal the electric device carefully.
b) Caution
Watch the hot parts
●
During operation and after operation, compressor and pipes are hot.
●
Also, under these condition, heater are hot.
●
Do not burn your fingers when you touch it.
Pay attention to refrigerant
●
Do not touch liquid refrigerant.
●
Otherwise, your hands may be burnt.
Pay attention to edge of parts
●
Otherwise, your fingers may be cut.
Pay attention to fins of evaporator and condensor
●
Otherwise, your fingers may be cut.
Before transportation, adjust adjustable bolt
●
Otherwise, the floor may be damaged.
Do not touch the pipe after brazing
●
Otherwise, your hands may be burnt.
-3-