Panasonic NN-L750WB, Руководство по обслуживанию

Страница: 52 / 137

9.6 Door disassembly
TOP PREVIOUS NEXT
1. Remove door C from door E by carefully pulling outward starting from the upper right hand
corner using a flat blade screwdriver.
2. Remove four screws holding the door E to the door A assembly
3. Remove the door screen B by carefully un-clipping the screen from the door A catch hooks.
Care must be taken not to damage these hooks during disassembly.
4. Remove the door key and spring form the door E
After replacement of the defective component parts of the door, reassemble it and follow the
instructions below for proper installation and adjustment so as to prevent excessive microwave
leakage.
1. When mounting the door to the oven, be sure to adjust the door parallel to the bottom line of
the oven face plate by moving the upper hinge in the direction necessary for proper alignment.
2. Adjust so that the door has no play between the inner door surface and the oven front surface.
if the door assembly is not mounted properly, microwave power may leak from the clearance
between the door and oven.
3. Perform the microwave leakage test.
Figure 7
Disassembly of the door
Figure 8
Adjusting the door hinge
•@