Panasonic NI-WT960, Руководство по эксплуатации

Страница: 11 / 17

11
English
How to use the “Power Shot” feature
The “Power Shot” feature provides extra steam which goes deep into the
garment and is helpful for removing stubborn wrinkles.
If you have not used the “Power Shot” feature in a long time, it is necessary to
clean the inside of the iron before using this feature on any clothes to be ironed.
Simply test the “Power Shot” feature several times away from the ironing board
and clothes to be ironed. This will prevent brown spotting or water spotting on
the clothes.
1
1
Fill the Water Tank with tap water as described in “How to
fill
the Water tank”.
2
2
3
3
Plug the Power Plug into a household socket.
5
5
Preheat the iron until the Thermostat Operating
Indicator Light switches out, usually it takes about 1 minute.
6
6
Simply pump the Power Shot Button when
needed.
•
Pump the Power Shot Button several times at the
beginning of each ironing session.
•
Press the Power Shot Button in intervals of at least
5 seconds between use to prevent water spotting.
•
If the Power Shot is weakened, wait until the
Thermostat Operating Indicator Light turns on,
and then off.
Use a press cloth if necessary.
Position the iron Heel rest position and
be sure the Power Switch is set to “ ”.
4
4
Set the Steam/Dry Selector to the Dry
position, and then set the Power switch
to “ ”.
The Thermostat Operating Indicator Light switches on.
•
If the temperature of the Soleplate is high,the light
switches off.
•