Panasonic NE-2140, Руководство по обслуживанию

Страница: 26 / 57

14.7. Replacement of temperature sensor (Thermal protector)
1. Cut 2 lead wires at the top of sensor terminals.
2. Remove 2 screws holding temp sensor and replace with new one.
3. Solder the lead wires securely to the sensor terminals.
14.8. Replacement of antenna motors (upper and lower)
1. The upper antenna motor may by removed by disconnecting the lead
wire connectors and removing its 2 mounting screws.
2. To remove the lower antenna motor, carefully place the unit on its left
side.
3. Remove the motor cover by removing 2 screws and follow same
procedure as for upper antenna.
CAUTION
There are two types of antenna motors Therefore
please replace with correct one as showing below.
Upper / Antenna / Motor PART NO.: /
ANE61446030AP / (RATED
: 120V)
Lower / Antenna / Motor PART NO.: / A6144-3280 /
(RATED: 120V)
25
Created with novaPDF Printer ( www.novaPDF.com ). Please register to remove this message.