Is the adapter connected correctly and firmly?
Please connect it correctly and firmly. (P.12)
Is the louver closed?
Please open the louver. (P.14)
Is the filter dirty?
Please carry out care and maintenance. (P.15)
Are the unit and filter dirty?
Please carry out care and maintenance. (P.15)
When the is generated, one may feel a small amount
of ozone. However, it is not harmful to human beings. (P.16)
There is a slight sound when is taking place.
Depending on the usage environment and operation mode,
the sound may seem to be loud or inaudible but these are not
abnormalities.
If the 8h off indicator is on, according to the function of the 8h
Off Timer, the unit will stop operating automatically 8 hours later
after the Power Off/On button is pressed.
To operate continuously, please press the Power Off/On
button and hold for about 2 seconds. (P.13)
Now
The air volume
indicator of
“Hi” blinks.
Please confirm the following:
If a problem is encountered, investigate it by first referring to the table below.
If the problem still persists, please disconnect the power plug and unplug the plug
used to connect the body from the body and contact the dealer for repairs.
Troubleshooting
The unit cannot
operate.
The air volume is
small.
An unpleasant
odor comes out.
There is a “jee”
sound from the
emission outlet.
The operation
stops.
When the Power Off/On button is pressed again, the unit will
start under the mode of “LOW” + 8h Off Timer.
Is the power plug disconnected from the accessory socket?
Please connect the power plug in the accessory socket
properly and securely.
(
P.12
)
When you
feel confused
Please disconnect the power plug and unplug the plug used
to connect the body from the body., and contact the dealer
for repairs.
Then is not generating.
Is the filter (air inlet) dirty?
Please carry out care and maintenance. (P.15)
Please disconnect the power plug and unplug the plug used
to connect the body from the body. and operate the unit again
after care and maintenance.
If the indicator still blinks after repeating the action,
it indicates that an error has occurred to the unit.
17
GMG01A
Содержание nanoe F-GMG01A
Страница 2: ...2 ...
Страница 32: ...日本印刷 MG01A8950 Printed in Japan M0814 0 2014 ...