Panasonic Nanoe EH-NA60, Руководство по эксплуатации

Страница: 21 / 28

21
English
·
Remove the dust etc. adhered to the outside of
the filter using a vacuum cleaner. If this does not
remove the dust, use your fingers to push the dust
etc. through the fine mesh on the internal side
towards the metal mesh on the external side, and
scrub away carefully with a toothbrush.
·
Using the toothbrush, carefully scrub away any dust
etc. from the internal side of the filter.
·
Using a vacuum cleaner or toothbrush, carefully
remove any dust etc. adhered to the air inlet.
* Rubbing forcefully with your nails may tear the
filter, so please use a toothbrush.
2. As shown in the illustration, press the filter onto the
hair dryer until a click is heard.
1
2
·
The hair dryer should be plugged into the household
outlet only in case of maintenance for the air outlet.
To clean the air outlet, set the temperature selector
to " Cool air” and the main switch to “2 Dry (Strong
airflow)" or "1 Set (Gentle airflow)", and rake out
with a brush while cool air is blowing out. Be careful
of dust that may be blown out.
Maintaining the nanoe™ outlet
If sparks occur inside the nanoe™ outlet, the
electrodes have become dirty resulting in an abnormal
discharge. If this happens, clean the inside of the
nanoe™ outlet as follows.
·
Clean only after turning off the power and removing
the power cord from the power outlet.
·
A needle portion is located deep within the nanoe™
outlet. Using a dampened cotton swab, rub this
portion gently about five times.
·
A thin cotton swab is recommended. A regular cotton
swab may work, but its thick head may be difficult to
insert.
·
Do not use hard objects to clean, or allow hard
objects to come into contact with, the parts of the
nanoe™ outlet so as to avoid causing them to
become deformed, which would affect the discharge
of nanoe™ and be dangerous.
Gently rub the tip of the needle portion
cotton swab
nanoe™ outlet