Panasonic nanoe EH-NA27, Руководство по эксплуатации

Страница: 13 / 52

13
English
Troubleshooting
Problem Possible cause Action
It switches frequently to cold air
while using in “Hot” air, or sparks
can be seen within the body.
(These sparks are caused by the
thermostat switch which is the
protective device, and are not
dangerous.)
Lint has accumulated on the air inlet or air outlet.
Hair or something is blocking the air inlet.
Remove accumulated lint.
(See page 11.)
Do not block the air inlet.
The hot air repeatedly turns into
cool air.
The hot air is abnormally hot.
The power plug is abnormally
hot.
The connection to the household outlet is loose. Fully insert the plug.
Sparks are generated inside the
nanoe™ outlet.
Abnormality caused by a dirty electrode
(needle portion). Perform maintenance of the nanoe™
outlet. (See page 10.)
The nanoe™ outlet emits a noise
(crackling noise).
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by
Panasonic for repair.
Specifications
Power source
220 V 50‑60 Hz 230 V 50‑60 Hz 240 V 50‑60 Hz
Power consumption 1 000 W 1 100 W 1 200 W
Accessory Quick‑dry nozzle
This product is intended for household use only.