4. Disassembly and Assembly instructions
4.1 Disassembly instruction
(1) Remove SHAFT COVER from Main body
(4) Remove PIVOT SPRING by gripping
by slotted screw driver (Minus driver).
and pull it out from the Main body.
NOTE: Use NEW SHAFT COVER once disassembling
due to easily breakage or looseness of hook.
(2) Remove TORX SCREW at SHAFT position
by screw driver (Star driver).
(5) Remove TAPPING SCREWS at PRESS PLATE COVER
by screw driver (Plus driver) and pull out
PRESS PLATE COVER from Main body.
(3) Remove SHAFT out by tiny-shaped screw driver
and pull it out from Main body
(6) Take off (HV) PCB from hook of PRESS PLATE 3 positions.
Minus driver
Shaft cover
Hook
Torx screw
Shaft
Tiny-shaped screw driver
Pivot spring
Tapping screws
Tapping screws
Tapping screws
Tapping screws
Press plate cover
Hook
Hook
(HV) PCB
Heater B
