12
Technical Specifications
If the spinner tub does not stop after 15 seconds from
the time you lifted the cover, immediately stop use of
the machine and call the serviceman.
Do not use too much detergent.
(The rinse will be insufficient.)
Please do not use a cover made of vinyl chloride on
the machine, as it can damage the plastic part and
the surface paint.
●
If you intend to use such as a cover then you should
first place a piece of cloth over the machine to keep
it from coming in contact with the cover.
If the amount of water is too much (the water
pressure being too high), tighten the tap.
●
This could cause the inlet hose to come off, or
water to leak from the tap.
Do not use sprays on the cover or on the machine
parts.
Bug poison, hair spray, air freshener, etc. can be
cause breakdowns and also crack the plastic of the
machine.
Do not allow the machine to gather condensation on
the floor.
●
When the air temperature is high and the water
temperature is low, condensation sometimes runs off
onto the floor.
Do not wash or spin any clothes, material or sheets
that are watertight.
(Example) Raincoats, fishing jackets and trousers, ski
wear, etc.
●
There is the possibility of such articles of fabric
coming out of the spinner tub during the spin-dry,
which can damage the clothes and/or the washing
machine.
Requests and things to abide by
W9901-0PM00
LS1120-0
NA-W100G1
220-240 V
~
Rated voltage
50 Hz
Rated frequency
630 W
Rated power consumption
10.0
Standard wash capacity
8.0
Standard spin-dry capacity
75 L
72 L
Standard water amount
Product dimension
0.275 MPa
33
Maximum pressure of water inlet
Product weight
Indonesia
Country of origin
Printed in Indonesia
930 mm (W) x 590 mm (D) x 1060 mm (H)
NA-W120G1
640 W
12.0
kg
kg
kg
kg
Panasonic Corporation
Website : http://www.panasonic.com
© Panasonic Manufacturing Indonesia PT 2020
R
T
