Maintenance
41
To prevent abnormal drainage
drain filter cleaning (about once a week)
When dirty
Main unit/Window seal
Exhaust filter
●
If there is any lint, water droplet or foreign object on the inside around
the edge of the door, please wipe it off with a wrung out towel.
(so as to avoid blockage by the lint which may cause water
leakage and odors)
When the dirt
is serious
Can wipe
with neutral
detergent used
in the kitchen.
Wipe with a soft cloth.
Attention
●
Do not use detergent, thinner, gasoline, alcohol, kerosene, etc.
●
When the machine body (especially the door and the operation
panel) gets wet with detergent or softener, it should be wiped
with a wrung out towel immediately.
(in order to avoid peeling of printed fonts, resin damage or metal
corrosion, or abnormal movement.)
Especially the resin part may crack when concentrated liquid
detergent gets into it; please be careful.
■ Clean the drain filter when the
indicator is flashing.
※
Especially when in Dry Mode, lint is easy to accumulate, so
please clean it every time.
※
If foreign objects such as lint are not removed, they may
cause the internal drainage pipe to be blocked. When
washing, if U11appears on the panel, please refer to P.45.
※
Do not open the drain filter while washing, otherwise it
will
cause serious water leakage.
※
Please make sure to turn to the
fixed position otherwise it will
cause water leakage.
①
Be sure to turn off the power after "Spin" is completed,
and then remove the cover.
②
When the drain filter is removed, water will flow out.
Please install the sub drain outlet.
③
After loosening the drain filter in a counterclockwise
direction, confirm there is no residual water, and then
take out the drain filter.
④
"
c
"
and
"
screw
"
are aligned and pushed in. Then
rotate 2 times clockwise until “
c
” and “screw”
are aligned.
⑤
Please remove the sub drain outlet.
⑥
Please install the cover.
How to take out the drain filter (the diagram below)
1. Remove the exhaust filter.
●Donotremovewhile
in operation.
●Afterremovingthe
filter, do not wash the
side of the machine
body or put anything
into it.
2. Wipe clean with a wrung out towel.
●Removethelintandthen
wipe it with a wrung out
towel.
Attention
●Aftermaintenance,besuretoinstallthe
exhaust filter back to its original position.
How to lock the drain filter.
Screw
④
⑤
⑥
①
②
③
Rotate
NA-V180HDH(s)_160HDH(s)-English.indb 41
2022/6/10 下午 10:27:29