4
Program
selection
(P. 5)
Operation Panel
Power Off/On
Air Dry
(P. 9)
Child Lock lamp
(P. 10)
Change water
amount
During the wash
process, press “Water
Level” to change the
water amount.
●
Some water amounts
cannot be selected
depending on the
program.
●
When the remaining
time is displayed,
press “Water Level”
to check the water
amount.
Water level/water amounts
Level
High
10-8
Mid
7-5
Low
4-2
Extra
Low
1
Model
Detergent *
Water
amount (L)
99 88 81 74 66 59 52 46 38 33
NA-F95G2
93 88 81 74 66 59 52 46 38 33
NA-F85G2
*
: 1 scoop of detergent
●
Each water level, except “Extra Low”, has
three water amount options that can be
switched while the level is lit by pressing
“Water Level”.
Water amount/remaining time
After starting operation, indicates
the water amount according to the
amount of laundry.
After approx. 5 seconds, indicates the
approximate remaining time (min).
NOTE
●
In case of a power failure during operation, operation will resume from the point where it was stopped when the
power is recovered (Auto Restart).
●
The power turns off automatically if you do not press “Start/Pause” within 10 minutes after power-on.
Change process
settings
Change the combination
of wash, rinse and spin
processes, and the time
length or number of times
for individual processes.
(P. 9)
Flashing (in progress)
Lighted
●
After starting operation,
you can change settings
only during wash
process by pressing
“Start/Pause”.
Preset
Set the time to
fi
nish washing
(in hours). ( lights.)
e.g.) 8 hours later
●
Setting range: 2 - 24
hours later, in one-hour
increments. (3 - 24 hours
later for the Soak program
and 4-24 hours later for
the Cotton Eco program)
●
Not available for the
following programs:
Delicate, Fragrance,
Bedding, Tub Hygiene, Air Dry
Temp Setting
For washing, cold water can be mixed
with hot water. Press the button to select
Hot/Warm/Cold. (P. 7)
Do not use water hotter than 60 ºC.
●
The estimated water temperature in
the tub during wash process (when
hot water is 50 ºC, and normal water
is 20 ºC):
Hot
approx. 40 ºC
Warm
approx. 30 ºC
●
Lamp indications
Lighted: Hot/Warm/Cold is set.
Flashing: Hot water is being supplied.
Start/Pause
