1. Check the installation location.
3. Attach the external drain water hose.
2. Attach the bottom cover.
12
12
Installation
■
Avoid the following locations for installation.
• Locations where there is a possibility of freezing.
• Locations exposed to direct sunlight
(To prevent malfunction or deformation)
• Uneven or unstable locations
(on blocks, timbers, table with wheels attached, etc.)
●
Do not block the opening of the bottom face with carpet, etc.
●
Insert all the way seated.
NOTE
Connect to the
connection port.
■
Hose arrangement
Slide the hose
band in the arrow
direction.
1
2
10 cm
or less
NG
3 m or less
●
Do not put the hose tip
under the water.
●
The height should be
10 cm or less.
●
The extension length
should be 3 m or less.
(Bottom face)
Water supply
hose
Water tap adaptor
Water
supply
valve
screw
■
If the installation, test run and inspection of the washing machine are not
carried out following this installation method, Panasonic will not be liable
for any accident or damage caused.
■
Make sure to ask a service person for installation. Do not install by yourself.
Hose band
External drain water hose
Main unit rear side
Hose band
Preparation: Set a cardboard, etc. and lay the washing machine on it, avoiding
product damage and deformation. (Face the front side down.)
1
Insert the bottom cover with its screw hole set
at the bottom.
Screw hole
Projection
2
Set 8 holes to the corresponding projections
and
fi
x with one screw.
Screw hole
NA-F953H̲インドネシア向洗濯機.indd 12
NA-F953H̲インドネシア向洗濯機.indd 12
2012/12/27 12:53:20
2012/12/27 12:53:20
