background image

17

Maintenance

Lint 

fi

 lter / Water supply hose 

fi

 lter / Main unit and tub

•   Be absolutely sure to follow the procedures as 

described, otherwise water will spray out.

1.  Turn off the water faucet.
2.  Press the [POWER ON] button.
3.  Press the [START/HOLD] button.
  The WATER LEVEL will light up a few seconds later.
4.  Press the [POWER OFF] button to turn off the power.
5.  Loosen the nut.
6.  Take off the hose.
7.  Clean the 

fi

 lter.

Water supply hose 

fi

 lter

•   When water supply seems constricted.

•   Upper part of the tub

 

Wipe with a damp cloth.

 

Do not apply water directly.

 

The 

fl

 oor could get wet.

Main unit and tub

•  

Main unit

 

Wipe with a soft cloth. Use a neutral dishwashing liquid or soap for 
stubborn places.

 

 Do not apply water directly.

  

Do not use cleanser, paint benzine, alcohol, kerosene, etc.

  

Follow any instructions that come with a chemically treated cloth.

1

1

2

1

2

Lint 

fi

 lter

•   When the 

fi

 lter is full.

1

(Lint 

fi

 lter A)

Remove the lint 

fi

 lter A. 

2

3

(Lint 

fi

 lter A)

Put the 

fi

 lter back in. 

Make sure it clicks 
into place.

1

(Lint 

fi

 lter B)

Pull out the lint 

fi

 lter B

from the lock.
By using 

fi

 ngers to 

press and pull out at 
the upper part of the lint 

fi

 lter’s side.

Remove the lint 
from the 

fi

 lter.

3

(Lint 

fi

 lter B)

Set it back to the 
original position.
•  Insert the bottom 
 

fi

 rst as shown in the 

fi

 gure.

•  Press down and lock as the arrow.

•   When the 

fi

 lter is torn, etc., obtain another one from the place of purchase.

•   Turn the wash tub if the 

fi

 lter cannot be removed easily.

Maintenance

To prevent from fungus growth at the outer tub area.

“TUB DRY”

Remark: Please be informed do not put laundry inside the tub during this program.

1

Press the [POWER ON] button.

2

Press the [PROGRAM] button six times
for [TUB HYGIENE] Course.

•  The [TUB HYGIENE] light will be indicated.

3

Press the [WASH] button and the [RINSE] button once each to select only [SPIN].

4

Press the [START/HOLD] button.

•  Spinning operation will be operated for 30 minutes

The buzzer lets you know when the washing is 

fi

 nished.

1

2

4

3

NA-F90T1 80T1_EN.indd   17

NA-F90T1 80T1_EN.indd   17

9/17/08   9:45:32 AM

9/17/08   9:45:32 AM

Содержание NA-F90T1

























Отзывы: