– 14 –
NA-F65B2 / F70B2 / F72B2 / F852B / F902B
Symptoms
Causes
Machine begins filling water in
the middle of the wash.
Water is not supplied.
• Check if the water faucet is turned on.
• Is the water supply cut off?
• Check if the connection of the water supply hose is clogged with dirt.
• Check if the lid is opened. Close the lid.
Washing operation still continue
even though the expected
finishing time had passed on
Reserve Program.
Tub shaking with the sound of
water.
• Washing time will be longer because of laundry unbalance, water
feeding and draining condition.
• When the laundry amount is large at the HIGH water level, the machine
sometimes fi lls automatically. When level goes down, the machine fi lls
automatically.
Water supply failure.
• Normally after the water supply failure, the water will become muddy.
Detach the water feeding hose and turn on the water faucet to release
to due muddy water. Fix water hose and start washing.
Power failure
• In this case, [Power On] and [Start-Pause} buttons need to be pressed
again after electricity is restored.Then then the machine will resume
oparation automatically from beginning of the stopeped process
• This is the sound of the liquid to maintain the balance during spinning.
Washing machine does not run
at all.
• Check if there is power failure.
• Check if the power fuse has blown out or the breaker is actuated.
• Check if the power plug is plugged in thoroughly.
• Check if the “power switch” has been pressed.
• Has the water faucet been turned on?
• Check if the [START/HOLD] button has been pressed.
• Has the machine been programmed under [RESERVE] timer?
