W
ashing
Detergent
7
Washing
Preparation:
●
Check if the washing machine is properly installed.
(P. 12)
●
Turn on the water faucet.
1
After loading laundry
Turn the power on.
●
The “Normal” program is selected when the
power is turned on.
2
Select a program.
(P. 5)
Press the button repeatedly until
the desired program lights up.
■
Timer preset
3
Start.
The pulsator moves without
water and measures the amount
of laundry (approx. 5 seconds).
Water level indication
(approx. 5 seconds)
Remaining time indication
●
To check the water amount
→Press “Water Level”.
4
According to the water amount indication
Put in detergent.
●
Approx. 20 seconds after the water amount
is displayed, water supply begins.
Set how many hours later to finish
operation.
(P. 4)
●
2 minutes after start, all indications except
turn off.
● To confirm after the timer has been set, press
.
●
To cancel or change, press
.
●
The hours that can be set differ depending on
the program.
■
After pressing “Start”
●
You can change the water level until the end of
the wash process.
●
You can change each of the “Wash”, “Rinse”
and “Spin” operation contents until the end of
the wash process. Press “Pause” beforehand.
●
You cannot change the program.
Timer preset
3
1
2
5
Close the lid.
Operation ends with beeps.
• Operation panel of NA-F100A4
