Troubleshooting - 29
Fault Checklist
Problem
Cause
W
ashing machine
Buttons do not work.
The programme, temperature and process settings cannot
-
be changed while washing is in progress (the rinse or spin
settings can be changed).
Child safety lock may be activated. (See page 24.)
-
Door does not open.
Door lock may be activated. (See page 25.)
-
Child safety lock may be activated. (See page 24.)
-
The water temperature or level may be too high.
-
Unusual odour
Rubber parts may give off a smell when you start using
-
the appliance, but the smell will go away over time.
You can wash the drum by running the 90°C programme.
(See page 26.)
W
ash
No water going into
the appliance.
The water tap might be turned off.
-
The water-supply hose may be frozen. (See page 28.)
-
The water supply may be disrupted.
-
The water-supply filter may be clogged. (See page 28.)
-
There is only a small
amount of water.
If you have paused the washing and then restart it, the
-
appliance may drain out some water.
Do NOT pour water in through the door.
Water builds up
during the washing.
This is normal; water is automatically supplied if the
-
amount of water has decreased. For heavy loads, the
water may fill up repeatedly.
Water drains out
during the washing.
This is normal; the water frequently drains out and builds
-
up in order to wash away excess foam. This feature is
called foam detection.
NA-168VX3_New Zealand.indb 29
2011-9-6 14:55:35
