Panasonic NA--148VB7LEG, Инструкция по эксплуатации и установке

Страница: 22 / 31

EN - 19 EN - 19
Start/Pause button
By pressing on the Start/Pause button,
you may start the programme you have
selected or suspend a running programme.
If you switch your machine to the standby
mode, the Start/Pause led on the electronic
display will blink.
• The electricity supply cuts out while the
appliance is on. (The appliance stops
operating. When power is restored, it
resumes operation from the point that it
had stopped).
5.10 Child Lock
The Child Lock function allows you to lock
the buttons so that the wash cycle you have
chosen cannot be changed unintentionally.
To activate child lock, press and hold
button 2 and 3 simultaneously for at least
3 seconds. ‘’CL’’ will flash on the electronic
display for 2 seconds when the child lock is
activated.
2 3
If any button is pressed or selected
programme is changed by the programme
dial while the child lock is active, the “CL”
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and
a programme is running, when the
programme dial is turned to the “Off”
position and another programme is selected
the previously selected programme
continues from where it was left.
To deactivate the child lock, press and hold
button 2 and 3 simultaneously for at least
3 seconds until the “CL” symbol on the
electronic display disappears.
Note : Door remains unlocked in case
when child lock is active and electricity is
cut off
5.11 If you want to pause/cancel a
running program or add laundry:
• symbol key allows you to pause or
restart the selected program. When you
want to add laundry, you can use this
function.
• Touch symbol button for this. If is
displayed on the screen, you can open
the loading door and add laundry.
• If is displayed on the screen, the
step where you can add laundry has
passed.
• If you want to cancel a running program,
turn the program knob to “Off” position.
Your machine will stop washing process
and the program will be cancelled. To
drain the water in the machine, turn the
program knob to any program position.
Your machine will drain the water and
cancel the program. You can select a
new program and start the machine.
5.12 Program End
Your machine will automatically stop when
the selected program ends.
• “End” will appear on the electronic
display.
• You can open the door and take out
the laundry. After taking out the laundry,
leave the door open so that the inside of
the machine can dry.
• Turn the program knob to Off position.
• Unplug the machine.
• Turn off the water tap.