Adjusting feet
(see P8)
Drum
(washing/ spin-drying tub)
Power cords/ plug
Never bind the power
cords when using them.
Name of Parts
Placement Location
Please ensure that all accessories are supplied with the machine.
※
New hose-sets supplied with the
appliance are to be used and that
old hose-setsshould not be reused.
Cover cap (4) (see P8)
Carrying the Machine
The washing machine must be
carried by 2 people.
Start by tilting the appliance backwards.
The appliance should be carried by two
people, one on each side holding it from
the bottom.
Installation of Bottom Plate
Placement Location and
Product Dimension
595
169
490(7 k
g
)
555(8 k
g
)
845
Size (unit: mm)
Set-in installation
-
You need a space of at least 64 cm wide. Provide
at least 2 mm of clearance on both sides and at
least 5 mm of clearance 5 cm on the top and 3 cm
on the back of the machine.
Be sure to insert the power plug into the
independent dedicated household socket.
Make sure the socket is placed at such a
place that enables you to easily pull out the plug.
-
-
Install the appliance on a flat, stable surface
to avoid excessive vibration and noise.
Do NOT install the appliance in direct sunlight
or in a place where temperatures reach
freezing.
Do NOT let metallic portions of the appliance
come into contact with metal plate of furniture,
sinks or other appliances.
Be sure to remove all packages (including the
foam cushion and anchor bolts assembly)
before using the machine. Otherwise,
damages may occur.
-
。
-
-
Caution
6
7
Placement Location
Name of Parts
Drain hose
Drain filter
(see P23)
Door gasket
Door
Place the washing machine in such a way that it is
inclined backward.Insert the end without holes
Into the box at the rear of the washing machine.
Press the bottom plate to make it bend slightly,
and insert the front end into the box of the washing
machine. Fasten two screws at the left and right
respectively (Notes: the screws have been supplied
in the accessories).
Detergent Container
(see P17)
-
Install the bottom plate before removing the
anchor bolts. Make sure the inclined position
of the washing machine is reliable and a person
standing nearby helps to support the machine
with hands.
When installing the bottom plate, make sure
that the plate does not bend seriously to prevent
breakage of the bottom plate.
-
Notes:
Make sure there is enough space for the
washing machine.
Inlet hose (1) (see P9)
Bottom plate (1) (see P7)
Bottom cover screws (4)
Operating Instructions
Accessories
