Troubleshooting - 29
Fault Checklist
Problem
Cause
Time The displayed
remaining time
changes.
The remaining time is estimated and corrected continually.
-
Thus, the time displayed may change.
Noise
There is an unusual
noise or vibration.
There may be metal items in the drum.
-
The anchor bolts may not have been removed. (See page
-
32.)
The appliance may be on a sloping or unstable surface.
-
If none of the above is the cause, contact your local
Customer Service Centre.
There is noise when
the water drains out.
This is normal; it is noise created by the operation of the
-
drain pump.
Others
The electricity supply
cuts out while the
appliance is on.
The appliance stops operating. When power is restored, it
-
resumes operation from the point that it had stopped.
A circuit breaker
trips, interrupting the
power supply.
The appliance stops operating. When the breaker is reset,
-
it resumes operation from the point that it had stopped.
However, we recommend finding and resolving the cause
of the trip before resetting the breaker.
The water supply is
disrupted.
When the water is supplied again, it may be impure at first.
-
You have to disconnect the water-supply hose and drain
away the impure water through the tap. Make sure that the
water-supply hose has been reconnected before using the
appliance.
The display is not
clear.
The appliance may be in a brightly lit or sunlit area.
-
NA-107VC4_EU.indb 29
2012-2-1 9:56:38
Содержание NA-107VC4
Страница 39: ...NA 107VC4_EU indb 39 2012 2 1 9 56 42 ...