To stop the operation
To open the cover immediately
Lower the pressure and temperature inside the chamber
forcibly in the procedure as follows:
1) Press the button while pressing the button.
2) To stop the exhaust, press the button again.
3) Check the following points before opening the cover.
Pressure is lowered to 0 MPa.
COVER LOCK lamp goes out.
When the COVER LOCK lamp is lit, the temperature or pressure
inside the chamber rises to make it impossible to pull the
movable handle toward you.
If liquid boils over in liquid sterilization, clean the inside of
the chamber.
Inside of the chamber :
See page 26.
1) Press the button.
The product is in standby status.
2) Check the following points before opening the cover.
Pressure is lowered to 0 MPa.
COVER LOCK lamp goes out.
For timer operation
When the COVER LOCK lamp is lit, the temperature or pressure
inside the chamber rises to make it impossible to pull the movable
handle toward you.Sterilization objects, wear heat-resistant leather
gloves for prevention of scald.
The operation can be programmed up to at 23:59 of 7 days later from
the current date and time.
1) Press the button.
The lamp above the timer button lights up
and the timer lamp on the digital
display
Ⅱ
lights up, and the current date
and time flicker.
2) Press the and buttons to set the operation starting day
and press the button.
The figures change quickly when the or button is kept
pressed.
The time on the digital display
Ⅰ
flickers.
Beep
Lamp goes out.
How to Use
24
(Continued)
Be sure to wear thermally insulated leather gloves.
Note that it takes time until liquid is cooled down.
Handling a sterilized object with bare bands immediately
after the end of operation may result in burns.
Use care not to scald yourself when taking out the sterilized
objects at the end of operation.
CAUTION
・
・
・
・
・
・
・
・