Panasonic Micro SD KX-HN6032AZW, Руководство по настройке системы

Страница: 11 / 24

Part names and functions
C
B A
D E
G H I
F
Speaker
LED indicator
DC socket
LINE socket
M Wi-Fi SETUP N
Used when performing initial setup.
microSD card slot
Used when inserting a microSD card.
Remove the label when inserting.
M HANDSET/LOCATOR N
Used when registering a handset. You
can also press this button to locate a
misplaced handset.
M CAMERA N
Used when registering a camera.
M OTHER DEVICE N
Used when registering a sensor or smart
plug.
LED indicator
You can use the LED indicator to confirm the
hub’s status.
Indicator Status
Off No power, or LED
indicator is turned
off
*1
Green, lit Normal operation,
connected to
wireless router
*1
Green, blinking Registration mode
Green, blinking
quickly Failed to connect to
wireless router
Alternating:
Green, blinking
Yellow, blinking Hub is starting up
(cannot be used
yet)
*2
Red, lit Alarm system is
armed
*1
Red, blinking quickly Alarm system was
triggered
Yellow, lit Initial setup required
Yellow, blinking Initial setup in
progress, mobile
device connected
Yellow, blinking
quickly Initial setup is
starting
*1 You can configure the hub so that its LED
indicator does not light during normal
operation. For more information, refer to
the User’s Guide (page 17).
*2 It may take some time for the hub to finish
starting up.
11
Setup
HNB600AZ_(en_en)_0325_ver.040.pdf 11 2015/03/25 13:55:43