Panasonic MICRO-IMAGECHECKER A100 Series, Руководство по оборудованию

Страница: 62 / 102

Optional Memory A200/A100 Hardware
6 − 3
6.1 Product Type Data Creation and Backup
6.1 Product Type Data Creation and Backup
Product type data is created with the special − purpose keypad. You can back up the
created product type data together with image data stored on the controller to a
*Windows PC, then restore the data later.
Keypad
This is an operational keypad that can be used with any A Series product. Nearly all
settings can be made using this keypad.
A 2m or 3m cable is provided.
Keypad
Vision Backup − Tool Version 2
You can use this tool to store (back up) created product type data to a Windows PC*
and then to transfer (restore) it to the controller.
Even if created data was destroyed it can be quickly restored if has been backed up.
Image data stored on the controller can also be stored on the Windows PC* in order to
contribute credibility to an inspection “failure.”
If an inspected product is assembled into equipment and shipped, then it doesn’t work
after installation, the “failed” image can be matched with the product type data and sent
by e
− mail so the malfunction can be analyzed anywhere.
COM/TOOL
RS − 232C
Cable
PC
Vision Backup − Tool
Ver2
* Dedicated software for personal computers running the Windows operating system
(running on IBM PC − AT or compatible PC).
Supported operating systems
Windows 95/Windows 98SE/Windows Me/Windows 2000/Windows XP
(Ver. 2.0, 2.1: Windows 95/Windows 98/Windows Me/Windows 2000)
* Windows is a registered trademark of Microsoft Corporation in the United States and
other countries.