Panasonic MDF-DC700VXC Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 59

Panasonic MDF-DC700VXC Скачать руководство пользователя страница 7

6

PRECAUTIONS FOR SAFE OPERATION

This unit must be plugged into a dedicated circuit protected by branch circuit breaker.

Use a dedicated power source as indicated on the rating label attached to the unit. A multiple-tap
may cause fire resulting from abnormal heating.

Never store corrosive substances such as acid or alkali

in this unit if the container cannot be

sealed. These may cause corrosion of inner components or electric parts.

Check the setting when starting up of operation after power failure or turning off of power
switch.

The stored items may be damaged due to the change of setting.

Be careful not to tip over the unit

during movement to prevent damage or injury.

Prepare a safety check sheet (copy the last page)

when you request any repair or maintenance for

the safety of service personnel.

LABELS ON UNIT

Warning safety labels applied to the ultra-low temperature freezer.
Users are advised to avoid accidents by carefully reading the warnings and cautions contained on
warning labels at key locations on the interior and exterior of the ultra-low temperature freezer.

Possible
Danger

Warning/Caution Type

Location of Danger

Warning/Caution Label

Description of Danger

Personal
injury

Environment

Refrigerating circuit

Warning fire.

Personal
injury

Frostbite and frost

Interior

Frostbite and frost caution label.

CAUTION

-64-

«
...
5
6
7
8
9
...
»

Содержание MDF-DC700VXC




























































Отзывы:

Нет отзывов