manualshive.com logo in svg

Panasonic MC-E4011, Руководство по эксплуатации, Страница: 5 / 12

Поделиться
Скачать
Panasonic MC-E4011 Скачать руководство пользователя страница 5

CAUTION: To prevent damaging carpeted floors, tiled floors, Linoleum,
etc. Do not leave the beater bar rotating in the same place for too long. 

– 5 –

B) MAINS LEAD RELEASE

C) ON/OFF SWITCH

Turn the upper cord hook
to release the mains lead.

To start or stop the cleaner, push the switch button to '

I

' to

turn ON and to '

O

' to turn OFF.

HOW TO OPERATE YOUR CLEANER

Fix the mains lead into the cord
clip to help secure it during use.

D) HANDLE LOCK / RELEASE BY FOOT PEDAL

Step once

Step a second time

To unlock the handle of the cleaner, step on the foot pedal. To return into the upright position, simply put the handle back.

E) HOW TO USE THE ACCESSORIES

IMPORTANT: When using the accessories, keep the vacuum cleaner in the upright position.

Lift up the hose grip to remove
the hose.

Connect any of the accessories, as indicated.

To prevent damage to carpeted floors with
long pile, tilt the cleaner back so that the
cleaning head is raised off the floor.

OFF

ON

While using the accessories, hold the handle with one
hand to avoid pulling the cleaner over. 

To avoid accidental injury, keep children away from the
beater bar while in operation.

1

2

3

1

2

1

2

3

CAUTION:

NOTE: After having finished using the accessories,
re-insert the hose to the suction pipe inlet.

NOTE: 

After use, unplug from the socket and

store the cleaner in the upright position.

Содержание MC-E4011













Отзывы:

Нет отзывов