7
H) HOW TO CHANGE THE DUST BAG
I ) FILTERS CARE
MAINTENANCE AND SERVICING
IMPORTANT NOTE:Before servicing any part, always
DISCONNECT THE CLEANER FROM THE MAINS SUPPLY
1) Remove dust cover simply
pulling it forwards.
2) Grip the cardboard of the
dust bag and pull out.
3) Install the dust bag by
pressing the cardboard as
shown.
4) Press bottom of the dust
bag and set it completely
inside the dust bag
compartment.
Make sure all edges of
the dust bag are
completely inside the bag
compartment.
IMPORTANT:
Dust bag should be changed regularly for the maximum efficiency of the filters and prolonged motor efficiency.
Never use the cleaner without the dust bag.
We recommend the use of genuine Panasonic bags Type U-20E only.
Central filter
The central filter (foam filter) is installed in the dust bag
compartment to protect the motor from dirt.
When it becomes dirty, simply rinse it out in warm water and
dry it thoroughly before replacing.
To remove the central filter, hold the filter at the top (as
illustrated) and pull it out.
IMPORTANT: Ensure that the filter is completely dry
before re-installing it into the cleaner.
Exhaust filter
(Clean air filter)
NOTE:
Under normal use, it is advisable to change the
Clean
air filter
once or twice a year.
To change the filter, first remove the dust cover and
then slide out the filter support. Replace the filter and
re-install.
IMPORTANT:
Never use the cleaner without the filters properly installed. Failure to do so may result in motor damage.
