7
3. Lift the upper body U to separate it from the lower body U.
4.3.
Printed circuit board assembly
(P.C.B Ass’y) removal
1. Remove the Swivel cap unit and Insulation plate.
2. Here is drawing of the lead wire before the P.C.B AU is
removed.
3. Disengage the fast-on terminal of the wires (red) and
(blue) which lead to the cord reel partition wall connected
to the printed circuit board assembly.
* Caution:
Pull out the fastening terminal without twisting it.
Pull out by holding down the section indicated by an
arrow.
4. Remove the P.C.B. Ass'y from the P.C.B. holder.
