4
A)
Floor nozzle
B)
Connection pipe
C)
Hose
D)
Curved wand
E)
Telescopic wand
F)
Hose inlet
G)
Dust cover
H)
ON/OFF Switch / power control button
I )
Cord rewind pedal
J)
Plug
K)
Multipurpose accessory
L)
Paper dust bag
A - IDENTIFICATION OF MAIN PARTS
B - HOW TO ASSEMBLE YOUR CLEANER
C - HOW TO OPERATE YOUR CLEANER
B-1
Insert the connection pipe into the hose inlet and turn
the pipe to the right.
B-2
Insert the curved wand into the upper end of the
telescopic wand, and the
fl
oor nozzle to the other
end.
B-3
You can adjust the length of telescopic wand by sliding
button.
C-1
Pull out the mains lead and put the plug into the
socket outlet.
C-2
Power control
「○」
:
OFF
You can turn the appliance ON by turning it to the
clockwise direction.
To increase or decrease the power, turn the variable
power control.
C-3
Switching between carpet and fl ooring
Flooring: Press lever A
Carpet: Press lever B
C-4
After you fi nish vacuuming, remove the plug from
the socket outlet and press the cord rewind pedal.
When rewinding the mains lead, press the cord rewind
pedal by holding the plug so that it does not become
damaged.
C-5
Storage position
Slide the wand holder straight into the wand supporter.
C-6
Park position
For short breaks during vacuuming, slide the wand
holder into the slot on the rear side of main body.
NOTE:
When you use park position, we suggest that
you switch the appliance off.
