Panasonic MC-BL480, Руководство по эксплуатации

Страница: 30 / 36

EN12
Maintenance Maintenance

When maintaining the nozzle, always close the vacuum cleaner and remove the nozzle.
(To avoid injury)

After removing the dust bin (P
.
EN10 ~ EN11), insert chopsticks, etc. to remove the foreign matter

When the suction power declines significantly or the running sound sounds abnormal, check whether the air passageway
is obstructed by foreign matter.
Air passageway Air passageway
Non-
washable
Non-
washable
Non-
washable
Non-
washable
 If the dust sensor lamp is abnormal (P. EN15), rubbish
or dust may adhere to the sensor part (2 places) inside
the body. Please perform maintenance.

Use a soft, dry cloth to wipe the attached rubbish,
dust, etc. from the front end
Sensors Sensors
Sensors
Sensors
About 7 cm
Air passageway
Plug Plug

Remove rubbish from the plug ( areas)
(P. EN4 ~ EN5)

Wipe up dirt, dust, etc. with a wrung soft and
damp cloth.
Body, extension wand etc. Body, extension wand etc.

Tap lightly to remove rubbish, dust, etc., or gently wash
and dry thoroughly.
Pre Filter Pre Filter
Mattress nozzle Mattress nozzle

Remove rubbish from areas

Gently clean
When the vacuum cleaner becomes dirty
When the suction power is weakened or about once a month