10. Recording Videos
270
Synchronise the time code default value with an external device that
supports time code signal input and output.
A
Flash synchro socket
B
BNC conversion cable (for TC IN/OUT) (supplied)
C
BNC cable (commercially available)
D
External devices
Preparations for Time Code Synchronisation
When [Count Up] is set to [FREE RUN] in the [
] mode, you can
synchronise the initial value of the time code with an external device.
1
Set the mode dial to [
].
2
Set [Count Up] to [FREE RUN].
0
¨
[
]
¨
[
]
¨
[Time Code]
¨
[Count Up]
¨
[FREE RUN]
3
Rotate the flash synchro socket cap in the
direction of the arrow to remove.
0
Be careful not to lose the flash synchro socket
cap.
Synchronising the Time Code with an
External Device