25
(ENG)
DVQX1999
ENGLISH
1
Align mark
A
(
) on
the lens hood with the
mark on the tip of the
lens.
2
Rotate the lens hood in
the direction of the
arrow to align mark
B
(
) on the lens hood
with the mark on the tip
of the lens.
0
Attach the lens hood by
rotating it until it clicks.
∫
Removing the lens hood
While pressing the lens
hood button
C
, rotate the
lens hood in the direction
of the arrow and then
remove it.
Note
0
When carrying, the lens hood can be attached in the
reverse direction.
1
Remove the lens hood.
2
Align mark
B
(
) on the lens hood with the mark
on the tip of the lens.
3
Attach the lens hood by rotating it in the direction of
the arrow until it clicks.
0
It is recommended to remove the lens hood during
flash photography as the lens hood can block the light
from the flash.
0
To prevent dropping of the lens, you should never carry
the lens by just holding the lens hood.
∫
Notes on filter use
0
It is possible to attach the lens cap or the lens hood
with the filter already attached.
0
There may be some vignetting in recorded images if
multiple filters are attached simultaneously.
0
It is not possible to attach any items other than filters
such as a conversion lens or adaptor to the front of the
lens and use it in combination with this lens.
Lens damage may result if such items are attached.
S-E70200-DVQX1999.book 25 ページ ２０１９年１１月７日 木曜日 午前１０時３８分
